13
Heat & Glo • SL-3X/5X/7X/9X-IFT (-G, -TG, -S)
Owner’s Manual • 2633-981 • 5/20
DANGER
DANGER
- Wait five (5) minutes to allow possible
accumulated gas to clear.
- Set the IFT-ECM 3-position selector switch to ON
or REMOTE position. Module will beep once and
flash a three GREEN LED code on successful
startup.
- If placed in ON position, the appliance will ignite
normally if the error condition was corrected.
- If placed in REMOTE position, use the paired IFT-
RC400, IFT-RC150 or wired wall switch to start
the appliance; appliance will ignite normally if the
error condition was corrected.
- If the IFT-ECM re-enters the lock-out condition
after these steps, call your dealer for service.
Wi-Fi (Optional)
If desired, a Wi-Fi module (IFT-WFM) may be added to
allow the appliance to be run via an app. Contact your
dealer to order.
Fan
• The fan functions are fully integrated into the Intellifire
Touch system.
• Fan operation is controlled by the wireless RC400
remote.
Electric Embers
• Electric Embers are a standard feature on all SL-X-IFT
fireplaces.
• The intensity of the these lights may be controlled
through the remote control included with your fire
-
place.
Appliance ON/OFF:
Your SL-X-IFT Series fireplace is supplied with a fully
functional remote control. This remote controls the:
• ON/OFF Functions
• Flame Height Adjustments
• Fan Control
• Thermostat
• Electric Ember Bed
• Cold Climate Feature
Refer to the RC400 Quick Reference Guide included with
the RC400 for details on operation.
