Heat & Glo Lifestyle Collection • GFK-160T Instructions • 2087-023 Rev. E • 6/10
2
FIGURE 2
4.2 INSTALLING THE BLOWER
Position the blower all the way to the left side of the fi replace
and center front to back. Pull the blower 1/8" to 1/4" away
from the side wall of the fi replace, see Figure 2.
DETAIL A
Note:
For wiring information see Figure 4. Position
the temperature switch as shown in Detail A, Figure
2. Secure in place with a screw supplied with this kit.
FIREPLACE
WALL
BLOWER
1/8” TO 1/4”
GROMMET
TEMPERATURE
SENSOR SWITCH
DETAIL A
WIRE LEADS THROUGH
SIDE OF UNIT
JUNCTION
BOX
CORD
ASSEMBLY
SPEED
CONTROL
PLUG BLOWER
NTO CORD ASSEMBLY
BLOWER
LEADS DOWN SIDE
OF FIREPLACE
GROMMET
LEAD TO
SPEED CONTROL
LEAD TO
JUNCTION BOX
TEMPERATURE
SENSOR SWITCH
