Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme
temperatures, or stored without a full charge may be permanently damaged, causing unreliable
performance and limited service life. It is recommended that you charge the scooter batteries
periodically throughout periods of prolonged storage to ensure proper performance.
Disposal of Your Power Scooter
Your power scooter must be disposed of according to applicable local and national statutory
regulations. Contact your local waste disposal agency or authorized dealer for information on proper
disposal of power scooter packaging, metal frame components, plastic components, electronics,
batteries, neoprene, silicone, and polyurethane materials.
CHECKS:
Make sure to keep the controller clean while protecting it from rain or water. Never hose off your
power scooter or place it in direct contact with water.
Keep wheels free from lint, hair, sand and carpet fibers.
Visually inspect the tire tread. If less than 1mm (1/32”), please have your tires replaced by your
local dealer.
All upholstery can be washed with warm water and mild soap. Occasionally check the seat and
back for sagging, cuts and tears. Replace if necessary. Do not store your scooter in damp or
humid conditions as this will lead to mildew and rapid deterioration of the upholstery parts.
All moving mechanism will benefit from simple lubrication and inspection. Lubricate using
petroleum jelly or light oil. Do not use too much oil, otherwise small drips could stain and
damage carpets and furnishings etc. Always perform a general inspection of the tightness of all
nuts and bolts.
Cleaning and Disinfection
Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of
your power scooter. Avoid using products that may scratch the surface of your power
scooter.
If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is
safe for use on your product before application. Follow all safety instructions for the proper
use of the disinfectant and/or cleaning agent before applying it to your product. Failure to
comply may result in skin irritation or premature deterioration of upholstery and/or power
scooter finishes.
26
Summary of Contents for S23K
Page 13: ...13...
Page 27: ...CIRCUIT DIAGRAM 27...
Page 28: ...S23K BOM LIST DRAWING 28...
Page 30: ...30...