17
3.Joystick
The joystick controls the direction, speed and tilt degree of your vehicle, pointing
the joystick away from the neutral position,(center), will move the vehicle in the
direction where the joystick is pointing. The farther away (forward/backward)
the joystick is from the neutral position, the faster the vehicle will go. The
farther away to the right/ left the joystick is pointing, the sharp the turn of the
vehicle will be. The farther away to the front/ back the joystick is pointing, the
tilt angle of the seat of the vehicle will be. To operate the vehicle gently push the
joystick in the direction you want to go. Returning the joystick to its neutral
position, (center), will reduce the speed and stop the vehicle by automatically
applying the electromagnetic brakes.
Notes:
→
After pressing the controller ON/OFF switch, allow two seconds to elapse
before engaging the joystick. This is a safety feature to prevent sudden starts.
→
Gentle operation of the joystick will result in smoother transitions in speed and
direction, while sharp operation of the joystick will result in drastic transitions
in direction and velocity.
→
When the wheelchair is in operation, the surface of the charger will become
slightly hot.
→
In case of emergency, let go of the joystick and the chair will come to a stop.
→
There is a safety design called inhibit switch device in the vehicle. The drive
power will be off automatically when the user sits on the vehicle and uses the
tilt function exceed a certain angle.
Warning:
The tilt angle adjustment range is from 0
°
to 45
°
for your vehicle. Never
stop tilting if you keep far way the joystick until to the maximum degree. Only adjust
the comfortable angle when you use tilt function then stop for safety.
B.
Controller Display
The controller display is a multifunction visual display. It can provide five types
of information:1)ON/OFF status ,2)battery condition meter, 3) Horn , 4)
acceleration and deceleration buttons, 5)tilt function.
1.
ON/OFF Status
When the power is on, the controller’s LED will be lit up. If the LED is not lit,
the controller is OFF.
2.Battery Condition Meter
The battery condition meter is composed of 10 segments (three of red, four of
yellow, and three of green). It enables you to monitor battery charge. The
battery condition meter indicates the approximate amount of battery charge
