Heartway Medical Products EV Rider TranSport EZ Fold S19M, User Manual

Page: 5 / 26

5
8.
Keep your hands away from the wheels (tires) while driving scooters. Be aware that loose fitting clothing can
become caught in the drive tires.
9.
Consult your physician if you are taking prescribed medication or if you have any certain physical limitations. Some
medications and limitations may impair your ability to operate scooters in a safe manner.
10.
Be aware when the drive mode is unlocked or locked.
11.
Don’t remove anti-tipper if there is any-tipper equipped with the scooter.
12.
Contact with tools can cause electrical shock and do not connect an extension cord to the AC/DC converter or the
battery charger.
13.
Do not attempt to lift or move your scooter by any of its removal parts, such as the armrests, seats, or shroud.
14.
When climbing an incline, don’t drive at an angle up the face of the incline. Drive your scooter straight up the
incline. This greatly reduces the possibility of a tip or a fall.
15.
Don’t climb a slope steeper than the scooter’s limitation.
16.
Don’t attempt to have your scooter proceed backward down any step, curb or other obstacle. This may cause the
scooter to fall or tip.
17.
Always reduce your speed and maintain a stable center of gravity when cornering sharply. Don’t corner sharply
when driving scooters at higher speeds.
18.
Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces may have an adverse affect on the
electrical system.
19.
Never sit on your scooter when it is being used in connection with any type of lift or elevation product. Your scooter
is not designed with such use in mind and any damage or injury incurred from such use is not the responsibility of
Heartway.
20.
Surfaces of the power scooter that can come into direct contact with the occupant’s skin and/or assistant’s skin
during normal use and that are within occupant reach shall not exceed 41 °C. The motor surface can reach
temperatures greater than 41°C after driving. Do not touch these parts when disassembling the scooter or wait
until the motor is cooled down.
21.
The programming of the controller shall only be carried out by personnel, which is authorized by his manufacturer.
A wrong programming can result in safety hazards for the occupant!
22.
If the power scooter is switched off while driving on the horizontal at maximum speed at 7 km/h, it will come to a
stop with the maximum stopping distance of 1.2 m. Please consider this distance when driving.
23.
Drive-wheel needs to be switched to engaged-mode while transporting the power scooter with a car or airplane.
24.
Surface temperatures can increase when exposed to external sources of heat.
25.
Surfaces of the power scooter that can come into direct contact with the occupant’s skin and/or assistant’s skin
during normal use and that are within occupant reach shall not exceed 41 °C. The motor surface can reach
temperatures greater than 41°C after driving. Do not touch these parts when disassembling the scooter or wait
until the motor is cooled down.
26.
Please always turn off the power prior to entering or existing this scooter.
27.
Do not operate this scoter if it is behaving abnormally or erractically.