www.heartway.com.tw
9
ASSEMBLY INSTRUCTION
Battery Replacement
1
1-1
3
4
2
Release the levers on both sides before lifting the saddle. (Figure 1, 1-1)
Lift the saddle until it forms an angle of 90° with the frame completely and safely before changing
the batteries.
Make sure that the connecting points (on both sides) are firmly connected and tighten before
removing the batteries. (Figure 3)
(Figure 2)
Disconnect the battery connectors and then remove the batteries properly (Figure 4)
Put the saddle back to the original position after battery installation
Tighten the levers on both sides after putting the saddle back. (Figure 1)
It may be necessary to install the seat either prior to initial operation or after transporting your power
chair to the customers.
Install The Skirt Guard
Insert the skirt guard support tube into the bracket in the correct direction. Tighten the adjusted knob
