Heartway Medical Products BIEN S15 User Manual Download Page 5

 

5

 

various daily living activities. Consult with your physician if you are taking any medication that 

may affect your ability to operate your scooter safely. 

6.

 

Do not attempt to lift or move a power scooter by any of its removable parts including the 

armrests, seats or shrouds. Personal injury and damage to the power chair may result. 

7.

 

Never try to use your scooter beyond its limitations as described in this manual. 

8.

 

Please do not sit on your scooter while it is in a moving vehicle. 

9.

 

Keep your hands away from the wheels (tires) while driving scooters. Be aware that loose fitting 

clothing can become caught in the drive tires. 

10.

 

Consult your physician if you are taking prescribed medication or if you have any certain 

physical limitations. Some medications and limitations may impair your ability to operate 

scooters in a safe manner. 

11.

 

Be aware when the drive mode is unlocked or locked. 

12.

 

Don’t remove anti-tipper if there is any-tipper equipped with the scooter. 

13.

 

Contact with tools can cause electrical shock and do not connect an extension cord to the AC/DC 

converter or the battery charger. 

14.

 

Do not attempt to lift or move your scooter by any of its removal parts, such as the armrests, 

seats, or shroud. 

15.

 

When climbing an incline, don’t drive at an angle up the face of the incline. Drive your scooter 

straight up the incline. This greatly reduces the possibility of a tip or a fall. 

16.

 

Don’t climb a slope steeper than the scooter’s limitation. 

17.

 

Don’t attempt to have your scooter proceed backward down any step, curb or other obstacle. This 

may cause the scooter to fall or tip. 

18.

 

Always reduce your speed and maintain a stable center of gravity when cornering sharply. Don’t 

corner sharply when driving scooters at higher speeds. 

19.

 

Operating in rain, snow, salt, mist conditions and on icy or slippery surfaces may have an adverse 

affect on the electrical system. 

20.

 

Never sit on your scooter when it is being used in connection with any type of lift or elevation 

product. Your scooter is not designed with such use in mind and any damage or injury incurred 

from such use is not the responsibility of Heartway. 

21.

 

Don’t touch the motor after driving. It is hot.   

 

 

 

Summary of Contents for BIEN S15










































Reviews: