CARE AND MAINTENANCE
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If your scooter is equipped with a solid tire
insert either the solid insert or the entire wheel must be replaced depending on the model. Contact your authorized dealer regarding replacement
wheels for your scooters.
⇨
Wheels on your scooter should only be serviced/replaced by a qualified technician.
⇨
Completely deflate pneumatic tires before dismantling the rim or attempting repair.
⇨
Be sure that the key is removed from the key switch and the scooter is not in free-wheel mode before performing this procedure repair.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodically for wear by your authorized dealer.
CONSOLE, CHARGER, AND REAR ELECTRONICS
⇨
Keep these areas free of moisture.
⇨
Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter again.
WARNING
35
