manualshive.com logo in svg

HearthStone Heritage 8090, Owner'S Manual, Page: 12 / 53

Share
Download
HearthStone Heritage 8090 Owner'S Manual Download Page 12

Hearthstone Quality Home Heating Products, Inc.  

 

Heritage Model 8090 Pellet Stove 

 

 

Page 12 of 53

 

 

Installation 

Manufactured & Mobile Home Installations 

 

 

WARNING: DO NOT INSTALL IN SLEEPING ROOM. 

 

 

CAUTION: ENSURE YOU MAINTAIN THE STRUCTURAL INTEGRITY OF THE HOME FLOOR, WALL, AND 
CEILING/ROOF. 

 

When installing this unit in a manufactured or mobile home, there are several mandatory requirements 
to follow: 

1.  You must bolt the stove to the floor. Accomplish this using the clips (PN 5532-012), and lag screws 

(5/16x1-3/4") used to attach the stove to the pallet for shipping. 

2.  You must connect the stove to outside air. (See page 16). 
3.  You must ensure that the outside air inlet remains clear of any objects, leaves, icing, snow or other 

debris.  Keep the inlet away form any exhaust fans.  The inlet requires an adequate amount of 
ventilation.  If the inlet becomes restricted during operation, the unit may starve for air, which may cause 
smoke spillage and an inability to maintain a proper fire.  This smoke may set off smoke detectors in 
your home. 

4.  You must remove venting when transporting the mobile home. 
5.  Use silicone to create an effective vapor barrier at the location where the chimney or other component 

penetrates to the exterior of the structure. 

 

 

Important:

 Use all specified components and methods for the installation. Do not use components that are 

not specified in this manual. Failure to use specified components and methods could void your warranty, 
and can cause malfunction or damage to the unit or structure.

Summary of Contents for Heritage 8090






















































Reviews:

No comments