HearthStone Quality Home Heating Products, Inc ®
62
WFP-75 Model 8411
Installation
1.
Remove the knockouts that close the 8"
(20 cm) diameter holes on top of the
fireplace. Then cut and remove the
insulation and the other set of
knockouts inside the fireplace.
2.
Secure the 2 anchor plates
(E)
with 8
screws provided
(F)
on top of the
fireplace (4 for each anchor plate).
Insert the telescoping section
(D)
into
each anchor plate and secure it with 6
other self-tapping screws provided
(G)
.
3.
Secure the telescoping sections
(D)
to
the heat distribution box
(C)
with self-
tapping screws
(G)
(3 per telescoping
section). Determine the needed height
and secure the two parts of the
telescoping sections together with 3
self-tapping screws. Insert the
adjustable frame
(B)
in the heat
distribution box
(C)
, press it against the
non-combustible material and secure
with 4 screws into the heat distribution
box. Set the decorative plate
(A)
to the
adjustable frame
(B)
.
It is strongly recommended to wear gloves to complete the installation.
