Hearth & Home Technologies • ODGF42 Doors • 4070-304 Rev A • 08/10
1
tm
Model:
ODGF42 Glass Door Kit
Installation
Instructions
These door kits have been tested for use with specific Hearth & Home Technologies products. Check with your local build-
ing code agency before you begin installation to ensure compliance with local codes, including the need for permits and
follow-up inspections. If you encounter any problems regarding code approvals, or if you need clarification of any of the
instructions contained here, contact your Hearth & Home Technologies Inc. dealer. For the dealer nearest you, please visit
www.hearthnhome.com.
Notice:
All fingerprints and smudges must be wiped clean
from the viewable surfaces of the door kit prior to the initial
burning of the fireplace. If this is not done, these prints and
smudges will be cured into the finish and set for the life of
the fireplace. To keep the finish looking its best, gently wipe
with a soft cloth and if desired, soap and water. Never use
thinner or abrasive cleaners since these products will damage
the finish.
Figure 1
ODGF Door Kits
cautioN! Risk of cuts/abrasions.
Wear protective
gloves and safety glasses during installation. Sheet metal
edges are sharp.
ODGF Bifold
Glass Doors
WARNING
Hot screen/mesh and glass doors will cause burns.
•
Do Not
touch screen/mesh or glass doors until
cooled
• NEVER allow children to touch screen/mesh or glass
doors
• Keep children away
• CAREFULLY SUPERVISE children in same room as
fireplace.
• Alert children and adults to hazards of high
temperatures.
High temperatures may ignite clothing or other
flammable materials.
• Keep clothing, furniture, draperies and other
flammable materials away.
HOT SURFACES!
Screen/mesh, glass doors
and other surfaces are hot
during operation AND cool
down.
