4
Hearth & Home Technologies • Pilot/Burner Conversion Instructions • 2205-937 Rev. C • 4/15
Verify the performance of the ignition system.
1. Turn
fi
replace on. Verify pilot sparks, pilot lights, pilot
stops sparking, and the main burner turns “ON”
2. Turn
fi
replace OFF. Verify that the both the pilot and
burner turn “OFF”.
3. Repeat Step 1 above.
4. With burner “ON”, remove green wire connected to
valve. The main burner should shut “OFF”.
5. Turn
fi
replace OFF. Reattach green wire to valve. Turn
fi
replace ON. Pilot and main burner should turn on.
6. With the main burner “ON”, remove orange wire con-
nected to the valve. The pilot and burner should go out,
and the pilot will start to spark.
7. Turn
fi
replace “OFF” and reattach orange wire to the
valve.
Please contact your Hearth & Home Technologies dealer with any
questions or concerns.
For the location of your nearest Hearth & Home Technologies dealer,
please visit www.hearthnhome.com.
Hearth & Home Technologies Inc.
7571 215th Street West, Lakeville, MN 55044
www.hearthnhome.com
