Hearth & Home Technologies • Heat-Zone-240V Air Duct Kit • 299-900D • 7/10
1
FLOOR REGISTER
TWO DUCT KITS
WALL REGISTER
WALL REGISTER
WALL REGISTER
CEILING REGISTER
Hearth Technologies, Inc.
7571 215
th
Street West
Lakeville, MN 55044 USA
Figure 1
Possible Air Duct Runs/Locations
INSTALLATION AND
OPERATION INSTRUCTIONS
Approvals
The HEAT-ZONE-240V air duct kit is approved for use on
Heat & Glo Models XLR-AU, 6000, 350 and 550 series
gas heaters.
Introduction
The HEAT-ZONE-240V accessory kit conveys warm air
from the heater through air duct(s) to remote locations
in the same room or other rooms of the building. See
Figures 1 and 2. One or two HEAT-ZONE-240V kits can
be installed on the heater.
Preliminary Preparation
1. Contents of kit:
• 6 meters of 152 mm round duct
• Fan housing assembly
• Junction box
• Air register
• Register adapter frame
• Heater duct collar
• Duct adapter - (round to oval)
• Hardware
• 2166-191 IPI Plus auxiliary jumper
Heat-Zone-240V Air Duct Kit
NOTICE! If any parts are missing or damaged, contact your
dealer before starting installation. DO NOT install a damaged kit.
