Hearth & Home Technologies • GFK21B Fan Kit • 4016-096 Rev I • 11/08
2
•
If the fan is being installed in a B-vent appliance, the fan
shield supplied with the appliance will also need to be
attached. See Figure 3.
1. Install the Fan Bracket & Shield
•
Place the fan bracket around the fan. See Figure 1.
•
Use pliers to crimp the bracket tabs around the fan
housing. See Figure 2.
•
If no fan shield is needed, install screws to hold the front
of the fan bracket in place. See Figure 4.
Figure 2
Crimp Bracket Tabs
Figure 3
Fan Shield
Figure 6
Magnets
Figure 1
Fan Bracket-No screws
Figure 4
Fan Bracket
Figure 5
Foam Tape
•
Attach the foam tape (Figure 5) and magnets (Figure 6)
to the fan. Cut one magnet strip in half and save the
remaining strip for control module.
