Project # 21-661 Model: Expedition-I
Page | 16
Sampling Methods
ASTM E2515 was used in collecting particulate samples. The dilution tunnel is 12 inches
in diameter. All sampling conditions per ASTM E2515 were followed. No alternate
procedures were used and no sampling intervals fell outside of proportional rates of +/-
10%.
Analytical Methods Description
All sample recovery and analysis procedures followed ASTM E2515 procedures. At the
end of each test run, filters, O-Rings and probes were removed from their housings,
dessicated for a minimum of 24 hours, and then weighed at 6 hour intervals to a
constant weight per ASTM E2515-11 Section 10.
Calibration, Quality Control and Assurances
Calibration procedures and results were conducted per EPA Method 28R, ASTM E2515-
11 and ASTM E2780. Test method quality control procedures (leak checks, volume meter
checks, stratification checks, proportionality results) followed the procedures outlined.
Appliance Sealing and Storage
Upon completion of testing, the appliance was secured with metal strapping and the seal
below was applied, the appliance was then returned to
the manufacturer’s location at
: 352
Mountain House Road, Halifax, PA 17032, for archival.
Sealing Label
Summary of Contents for Expedition-I
