Important
• Read these instructions carefully and familiarize yourself with the procedure before assembling the unit.
• Take all the components and fittings out of the plastic bag and separate them into their groups.
• Ensure you have enough space to lay out all the parts before assembly.
• Always be sure to use the correct type and wattage of bulbs as indicated on the fitting. Never exceed
the wattage stated.
• To avoid scratching it is recommended that you assemble the unit on a soft level surface.
• When changing the bulb, always switch off at the mains and allow the old bulb to cool down before
handling. Dispose of used bulbs carefully.
• This luminaire is Class II insulated. If the external flexible cable or cord of this luminaire is damaged,
it must only be replaced by a qualified electrician to avoid any electrical hazards.
• The luminaire is designed for indoor use only.
Instruction to use
1. Screw tube A, tube B and tube C together.
2. Pull the external flexible cable through the bottom tube.
Take care the excess cable does not become trapped or
twisted when fixing tubes together. And then screw tube
C onto the base (see diagram).
3. Loosen the screws on the tube using the Allen key provided
but do not remove completely. Arrange the arms so they are
spaced equally and tighten the screws.
4. Insert the bulbs into the lamp holder. Type and wattage as
indicated on the fitting. The wattage indicated must not be
exceeded.
5. Place glass shades over the light bulbs and push it onto
the lamp holders.
6. Plug the floor lamp into a suitable mains socket.
B
A
C
