Volume Control / Listening Settings
10
Volume Control:
Adjust the volume up and down by rotating the volume control wheel.
The higher the number, the more amplification.
Note:
Feedback is a whistling or squealing sound that
hearing aids can make. Feedback can be caused by a
hearing aid being set too loud. If you experience feedback,
reduce the volume slightly or try the ZipTip without a vent.
Choosing your Listening Settings:
You have 4 multi-memory settings to choose from.
When turned on, your Ranger-7600 will be on setting 1.
Simply push the button to choose the setting you need.
Setting 1: Normal setting – 1 beep. Use in most
listening situations.
Setting 2: Noise setting – 2 beeps. Reduces the amount of low
frequency amplification. Often helpful in noisy situations.
Setting 3:
Whistle reduction –3 beeps.
Use if your Ranger-7600
whistles
or if sounds seem too sharp or tinny.
Setting 4:
Telephone setting – 4 beeps. Use when talking on the
telephone or with a loop system. Hold the telephone receiver as
close to the hearing aid as possible. You will only hear sounds from
the telephone or loop system.