8
1-800-221-2099 • HearingHelp.com
Volume Control:
Your Apollo-6670 is equipped with a
rocker control that allows you to select your listening volume.
Increase the volume:
Each time you press the top
end of the rocker control, you’ll increase one volume
level and hear a single beep. There are 10 volume
levels to choose from. Once you reach the highest
volume you will hear a voice say “maximum volume”.
Decrease the volume:
Press the bottom of the rocker control to decrease
the volume. You will hear a single beep at each level. Once you reach the
lowest volume you will hear a voice say “minimum volume”.
aDJusting
the
voluMe
control
Program Control:
Your Apollo-6670 is equipped with a push
button program control (located above the rocker control).
Easily choose between four program settings by pressing the
program button. When you press the program button you
will hear a voice prompt say “program 1”, “program 2”,
“program 3” or “program 4”.
Program Setting 1: Normal setting – use in most listening situations.
Program Setting 2: Noise setting – reduces the amount of low
frequency amplification. Often helpful in noisy situations.
Program Setting 3: Whistle reduction setting –
Use if your
Apollo-6670 whistles or if sounds seem too sharp or tinny.
optional
telephone
setting
This can be installed in addition to any of the program settings listed above.
Program Setting 4: Telephone setting –
Use when talking on the
telephone or with a loop system. Hold the receiver near the hearing aid
a little above your ear. You will only hear sounds from the telephone or
loop system.
choosing
your
prograM
setting
You have a "smart" Apollo –
Each time you turn your Apollo on, it will
be on the volume level you were using when you turned it off.
VOLUME
DOWN
VOLUME
UP
PROGRAM
CONTROL
8
1-800-221-2099 • HearingHelp.com
