9/
12
Recess in Cavity
as an add on
to Music/
Performance
Audio Infrastructure
by Others
Precabling is to be completed prior to installation of
SoundHouse in accordance with electrical diagrams
for the project.
All SoundHouses require connection of power to inbuilt
GPOs in SoundHouse. Connection of power to SoundHouses
to be done by a registered electrician.
Other cables will require connection as per electrical
diagrams. These connections may include cable from PA
speaker, cable from AV systems and cables to speakers in th
learning space. *
SoundHouse has holes in its base for recessed installation.
*Note. Go to Point 2 on Page One for cabling length from AV
source to SoundHouse.
Power to internal GPOs
Cable from PA speaker
Cable from Comms Box of music /
performance system to input jack
on ElectroBox inside SoundHouse
Cable from Access Link in SoundHouse
to Comms Box of music/performance
system in space
25mm hole shown is to be used
for the power supply with an electrician
supplied conduit. The hole in the rear
of the box is not to be used when
SoundHouse is recessed into the wall.
25mm power
supply hole
NB. Connect 240v power to first internal
preinstalled GPO and parallel cable to
two other internal preinstalled GPOs.
No extra GPOs required for installation.
Summary of Contents for uconnect SoundHouse
Page 4: ...4 12 Recess in Cavity as an add on to Music Performance Audio Infrastructure by Others ...
Page 5: ...5 12 Recess in Cavity as an add on to Music Performance Audio Infrastructure by Others ...
Page 12: ...12 12 Recess in Cavity as an add on to Music Performance Audio Infrastructure by Others ...
