Hear and Learn SoundHouse speaker wiring instructions.
4. From 955 amp/receiver in SoundHouse to 8 x in – ceiling DRQ speakers, or 8
on wall WMQ speakers
Activate Ready
Info and Trial/Advice/Design Sign Up at
www.activatetocollaborate.com
Activate is part of the
www.hearandlearn.com.au
WHFKQRORJ\IDPLO\2ɝFHV$XVWUDOLDZLGH
)OH[PLNH
ΖQEXLOWDPSOLȴHG
message
IURPRɝFH
Audio from
AV devices
PERFECT FOR UP TO 100 M
2
FLOOR SPACE
TCQ
Speaker
6RXQG+RXVH7UDGLWLRQDOURRPVXSWRP
RIȵRRUVSDFH
6KDUHPLNH
Transmitter to
neckloop
Transmitter to
hearing aid
6RXQG+RXVH
by Hear and Learn -
WKHDOOLQRQHKHDULQJDXJVRXQGȴHOGVROXWLRQ
$XJPHQWDWLRQ
ȏ
Direct augmentation of all sounds of teaching including those
required under Federal Building Regs.
ȏ
5DGLR)UHTXHQF\WUDQVPLWWHUGLUHFWWRPRVWVWXGHQWDQGVWDKHDULQJDLGV
securely enclosedin clear plastic for line of site operation
ȏ
Infra Red transmitter and personal loops to all other hearing aids
using T Switch (RF device may be used for Agile Spaces).
ȏ
Number of loops: 1 per 25 students
ȏ
Same design for all rooms to ensure uniformity and simplicity
ȏ
Signage on the unit
ȏ
Capture of all sounds of teaching as described in
Vic State VSBA
%XLOGLQJ4XDOLW\6WDQGERRN0D\
inc AV, PA and voices
6RXQGȴHOG
ȏ
Even distribution of all audio to all areas of the learning spaces
ȏ
Choice of teacher and student microphones
ȏ
Only solution with in ceiling speakers
ȏ
:RUOGȇVVPDOOHVWVRXQGȴHOGPLFURSKRQH
ȏ
8VHV5)IUHTXHQFLHVH[FOXVLYHRI:LȴDQGRWKHUV\VWHPVIRUQRFRQJHVWLRQ
6LPSOHDQGHDV\
ȏ
Easy install to 450 mm studs
ȏ
Slimline with 100 mm depth
ȏ
3UHFXWPRXQWLQJSODWHȴWVDURXQGVSHFLȴHG*32QRYLVLEOHFDEOHV
ȏ
Door signage for compliance
ȏ
Supplied prewired and ready for install
Expand to future proof for Whole Group Instruction AND collaborative learning
No ceiling tile grid?
Other speaker
types available
955 Access with 8 Speakers
LIGHTSPEED APPLICATIONS
Connect speaker wire to the
back of the 955 via euro-block
connector with 18 awg speaker
cable.
Maintain polarity and connect
the red wire to + and the black
wire to – at the amplifier.
Tighten screws on top of the
euro-block to secure individual
wires.
Plug the euro-block into the 955
and secure with two side screws.
955 Access Back
955 Access Front
External
Speaker
Connections
