31
30
Touch the blood drop to the sample channel at the end of the strip. The
blood is drawn into the test strip automatically. When you hear the beeper, you can
start the test. After 5 seconds, the result will appear. Touch the blood drop to the
sample channel at the end of the strip sample channel at the end of the strip.
do not drop the blood directly.
After showing the test result, please take the strip out.
After taking the strip out, the meter will turn off automatically.
If the test result is abnormal, please use a new test strip to test again.
4. Put the tip of the lancing device back on and turn it
clockwise
5. Hold the tip firmly in one hand then pull out the sliding
barrel with the other hand. This will cock the lancing device
6. Hold the meter firmly against the side of the finger, with
the cap resting on the finger. Press the release button to
take a sample
7. Gently squeeze and massage your fingertip until a round
drop of blood forms on your fingertip.
Never use a lancet that has been used by someone else.
Don't reuse lancets. Do not leave the lancet in the device.
Always dispose of the used lancet in a biohazard container.
In order to avoid children choking, please store the lancing
device in a place where children cannot reach.
vv
Proper Blood Sample
4
5
6
7
Add Blood Sample
The test result will appear after the meter counts down
5 seconds, you can hear the sound of beeper, and the
screen will show test result, date and time.
In the process of counting down, please
don't shake it.
S
E
T
T
IN
G
S
E
T
T
IN
G
