TIME
Press and Hold TIME button for six seconds to switch
between Fahrenheit and Celsius.
°F or °C
UNITS SET
TEMP
TEMP
TEMP
TEMPERATURE
SET and ADJUST
Press TEMP button once to turn Heat ON. Press
TEMP again to initiate temperature adjustment mode
(temperature indicator will start flashing). Set the desired
temperature and press TEMP again to save the setting.
TIME
TIME
TIMER
SET and ADJUST
Press TIME button to initiate time adjustment mode (time
indicator will start flashing). Set the desired time and
press TIME button again to save the setting.
Press the Power button to turn ON the controller. TEMP and
TIMER indicators will light up on the screen.
POWER
Mesh
J
T Series Controller
Instruction Manual
P-0092
i
Information
(Click video link for more info)
Please allow up to 40 minutes for the surface to reach the maximum
temperature.
Once flashing temperature has stopped, the indicator displays the
actual temperature measured at the core of the Mat.
Press and hold or to reach desired numbers faster.
Factory Reset:
With power on, press and Hold button for 10 seconds.
The controller will shut down, reset, and turn back on automatically.
4
J
T
Series Guide
