Important
Important
Caution
Make sure the surface area is clean and dry.
Place the Healthyjuicer close to the edge of the table or counter top
(approximately 1/4” or .5cm from the base edge) with the auger shaft
pointing away from the table.
Lock the base by turning the knob in a clockwise direction. Use the
pusher/lever if necessary.
If necessary, insert the supplied metal clamp into the hole on the
base and tighten securely by hand only..
The table surface should be smooth and non-porous
such as formica, glass, ceramic tile, stainless steel or
plastic.
Place the handle over the auger shaft and
hand tighten the screw knob.
Position the juice cup so that the extended
portion is under the juice spout, which is
located on the main body under and in back
of the hopper.
*You may also want to place a bowl (not
included) under the end cap to collect any
excess waste material.
Do not overload the Healthyjuicer. Feed small
amounts at a time into the hopper.
The Healthyjuicer also includes a handy wrench for
tightening and loosening the end cap (leave the body
on the base to loosen the large cap just slightly. You
may then remove the body and fully unscrew the cap.)
Juice
spout
Tighten handle
Place small bunches of wheatgrass or leafy vegetables
such as spinach into the hopper and use the pusher to
press down as the handle is turned in a clockwise
direction.
If you encounter too much resistance try briefly
turning the handle in a counter-clockwise direction.
Never use your hand or fingers to push food into the hopper while
the handle is being turned.
