background image

11

CARE AND MAINTENANCE

Y

our lift chair will require routine maintenance checks. You can perform some 

of these checks, while others may require assistance from a provider. By 
following these maintenance checks, you can make sure your lift chair gives 
you years of trouble-free operation. If you have any questions or concerns 
regarding your lift chair’s care and maintenance, contact your provider.

 

9

Before cleaning your lift chair, consult your provider for the proper types 

of cleaner and cleaning methods.

 

9

Keep all electrical components free from moisture and liquid spills. 

Intended for indoor use only.

 

9

Periodically inspect all wiring harnesses to make sure they are not cut, 

damaged, frayed, or disconnected. If damage of any type is present, 

unplug the lift chair and contact your provider.

 

9

Periodically check all fasteners for tightness, wear, and corrosion. If any 

of  these  are  present,  unplug  the  lift  chair  and  contact  your  provider.                                                                         

 Warning: Be careful of pinch points and sharp metal parts (wear 

gloves). 

 

9

Replace the batteries after one use. Replace the batteries yearly, even if 

they were not used. Batteries are intended for one use only!

Summary of Contents for Ascent PR127

















Reviews: