.
Ensure pieces are not larger than 4cm for optimal juicer extraction.
.
Remove any large pips or seeds
.
Always pre-wash food before juicing.
.
Do not overstuff the feeding cylinder or force food in. Insert food slowly to
allow juicer time to work. The pusher is only to be used if food becomes
stuck.
5.
Switch the power button to “ON”.
.
Insert food slowly to allow juicer time to work.
.
Do not overstuff the feeding cylinder or force food in. The pusher is only to be used if food
becomes stuck.
6.
When you are finished switch the power button to ‘OFF’.
IF THE MACHINE BECOMES CLOGGED AND IN-OPERABLE:
1.
Turn the machine off and press the reverse button for a few seconds then try operating
again. Note: The reverse button works with a ‘pulse’ motion. It will only operate when
the button is pressed and held down.
2.
If the reverse button does not work turn off the machine and switch off at the power
point. Disassemble the unit to dislodge any material then reassemble as per the
instructions and try again.
HOW TO DISSASEMBLE AND CLEAN THE UNIT:
1.
Switch off the unit.
2.
Twist the bowl cover anti-clockwise. When the arrow on the bowl cover is pointing to the
corner at the top of the main body it can be lifted upwards and released from the juice
cup.
3.
Remove the rotating propeller.
4.
Remove the filter screen.
5.
Remove the juice cup from the main body.
6.
Use the brush to clean all of these parts thoroughly in warm soapy water then dry
thoroughly.
7.
Use a damp cloth to wipe down the base of the unit.
CLEANING TIPS:
Thoroughly clean immediately after each use to minimize staining.
Pull out the rubber stopper on the base of the juice cup to clean the juice sup and stopper
effectively. Always ensure the rubber stopper is re-inserted prior to juicing otherwise it may
cause a leak.
Do not use harsh abrasives or chemicals to clean the juicer.
The parts are not dishwasher safe. Do not wash with a dishwasher.
