Maintenance and Treatment
1.
Verify that all the bolts and nuts are locked properly and all turning parts should be turning
freely without any damage to those parts.
2.
Clean the equipment with soap and slightly damp cloth only. Please do not use any solvent
to clean the equipment.
Malfunctions and Treatment Solutions
Malfunction
Reason
Treatment
Base is unstable
1. Floor is not flat or there is
small object under the front
or rear stabilizer.
2. The rear stabilizer end caps
have not been leveled when
assembling.
1. Remove the object.
2. Adjust the rear stabilizer end
caps.
Handlebar or
seat cushion is
shaking
The bolts and saddle post knob
are loose.
Tighten the Bolts and saddle post
knob.
Loud noise from
the moving parts
The parts are improperly
tightened.
Open the covers to adjust.
No resistance
when riding the
upright bike
1. The interval of the magnetic
resistance increases.
2. Tension control is damaged.
3. Running belt slips.
4. The bearing set is damaged.
1. Open the covers to adjust.
2. Change the tension control.
3. Open the covers to adjust.
4. Change the bearing set.
Summary of Contents for CP-920
Page 4: ...Exploded Diagram...
