12
9. With the help of a second person, hold the con-
sole assembly near the Right Handrail (64).
See the inset drawing.
Connect the Upright
Wire (63) to the console wire.
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Next, remove the wire tie from
the Upright Wire.
Then, connect the ground wire from the console
assembly to the ground wire on the Console
Crossbar (61).
64
9
63
61
Ground
Wires
Console
Assembly
Console
Wire
63
Wire
Tie
Console
Wire
8
61
7
5
5
8
8
23
76
66
8. Remove and discard the four indicated screws
(D).
Attach the Console Crossbar (61) to the Left
and Right Uprights (66, 76) with four #10 x 3/4"
Screws (8) and four #10 Star Washers (23);
start all four Screws, and then tighten them.
Then, firmly tighten the two 5/16" x 3/4"
Screws (5) and the two 5/16" x 3" Screws (7).
23
7
D
64
59 D
Summary of Contents for Softstrider HRTL59215.0
Page 5: ...5 all STANDARD SERVICE PLANS...
Page 27: ...27 NOTES...
