19
THE COOL DOWN MODE
To select the cool down mode, press the Cool Down
button. Then, press the Start button. The walking belt
will begin to move at 2.5 mph. After a few minutes, the
walking belt will slow to a stop.
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The time display will show the total number of hours
the treadmill has been used.
The distance display will show the total number of
miles (or kilometers) that the walking belt has moved.
The lower display will show the status of an iFit Live
module. If an iFit Live module is connected, the display
will show the words WIFI MODULE. If a USB module
is connected, the display will show the words USB/SD
MODULE. If no module is connected, the display will
show the words NO IFIT MODULE.
The matrix will show the selected unit of measurement.
To change the unit of measurement, press the Enter
button. To view distance in miles, select ENGLISH. To
view distance in kilometers, select METRIC.
While the information mode is selected, press the
decrease button next to the Enter button to select
each of the following screens:
1.
The display demo mode.
The console features a
display demo mode, designed to be used if the
treadmill is displayed in a store. While the demo
mode is turned on, the console will function nor-
mally when you plug in the power cord, press the
power switch into the reset position, and insert the
key into the console. However, when you remove
the key, the displays will remain lit, although the
buttons will not function. If the demo mode is
turned on, the word ON will appear in the matrix.
To turn on or turn off the demo mode, press the
Enter button.
2.
The contrast level of the display.
Press the
Incline increase and decrease buttons to adjust the
contrast.
If a module is connected, you may also select the
following screen:
3.
The status of the personal trainer voice.
To turn
on or turn off the voice of the personal trainer,
press the Enter button.
If an iFit Live module is connected, you may also
select the following screens:
4.
The default menu.
The default menu will appear
when you insert the key into the console or when
you press the Home button. Press the Enter button
repeatedly to select the manual main screen or the
iFit Live screen as the default menu.
5.
The status of an iFit Live module.
Press the
Enter button to check the status of your iFit Live
module. The lower display will show the software
version number, the network SSID, the network en-
cryption type, the connection status, the wireless
signal strength, the IP address of the module, the
number of registered users and their names, the
results of the DNS lookup, and the status of the iFit
Live server.
6.
Transfer data.
To send and receive workouts,
workout logs, and updates, press the Enter button.
When the process is finished, the words TRANS-
FERS DONE will appear in the display.
To exit the information mode, remove the key from the
console.
