10
8. Set the console assembly on the brackets on
the Left and Right Uprights (88, not shown).
Be
careful not to pinch any wires.
Attach the console assembly with four 5/16" x
1 1/4" Patch Screws (4) and four 5/16" Star
Washers (11) (only one side is shown).
Start all
four Patch Screws, but do not tighten them
until assembly step 12 is completed.
Insert the excess Upright Wire (77) into the hole
in the console assembly. Tighten the ties around
the Upright Wire and cut off the ends of the ties.
8
Console
Assembly
11
4
88
77
Bracket
9. Identify the Left and Right Handrails (81, 82).
With the help of a second person,
attach the
Handrails to the Pulse Bar Bottom (87) with four
3/8" x 3/4" Patch Bolts (9).
Start all four Patch
Bolts, and then tighten each of them.
9
81
87
82
9
9
Ties
