Figure 4B
Steps for Use of Product
1.
Turn the On/Off switch to the On position.
Fig 1
2.
Use the brightness controls on the top of the magnifying lamp to select the level
of LED brightness.
Fig. 2
3.
To remove the lens, hold onto the lamp with one hand. Remove the lens by
pushing up from underneath and grab the rubber ring of the lens with the other
hand.
Fig. 3
4.
Still holding the lamp with one hand, push the lens in the lamp opening by the
rubber ring until it is secured.
Fig. 4, 4A, 4B
Interpretation of Test Results
Contraindications of Test Results
Documentation
Special Warnings and Cautions
●
Prior to switching the interchangeable lens, hold the lamp with one hand.
Otherwise, the arm of the magnifier will spring up once the lens has been
removed.
●
Keep the additional lens in the zip-up carrying case to avoid damage.
Disposal
Reprocessing Instructions
Point of Use
Preparation for Decontamination
Disassembly Instructions
Cleaning – Manual
●
Wash in warm soapy water or use lens cleaner.
●
Dry with a clean soft cloth (never use abrasive cleaners).
Cleaning – Automated
Disinfection
●
To clean the lens: Wipe the lens with Isopropyl alcohol wipe (do not use on the
magnifying lamp as it may damage the plastic finish).
●
To clean the lamp: Wipe the lamp with a multi-surface disinfectant and non-
linting wipe (do not use on lens and it may cause damage).
Drying
Maintenance, Inspection, and
Testing
Reassembly Instructions
Packaging
Sterilization
Storage
Store lens in zip-up carrying case.
Additional Information
Related Healthmark Products
Optical Inspection Products
Other Product Support Documents
ProSys™ Brochure, ProSys™ Price List
Reference Documents
Customer Service Contact
Healthmark Industries Company, Inc.
18600 Malyn Blvd.
Fraser, MI 48026
1-586-774-7600
hmark.com
2019-11-15 Suzanne Latta
Rev. A
