Replacing the ink-roll
1
2
3
4
5
Steps for Use of Product
Setting the characters
1.
Pull adjustment knob to desired position and turn knob to select character to
print.
2.
Press knob in before printing (
Important:
failure to do so before operating could
cause damage).
Labeling
1.
Place your hand around the handle and squeeze you fingers to your palm.
2.
Release the handle back to the starting position.
3.
Pulling the handle will release the label from the opposite end of the label gun.
4.
Repeat to use another label on another product or package.
Replacing the label-roll
1.
Pull red release for the top slide back.
2.
Place new label roll inside with the label flap coming over the top.
3.
Secure the end of the label roll to the top end of the label gun.
4.
When in use, the label will dispense through the chamber.
Replacing the ink-roll
1.
Pull down back flap of the label gun
2.
Raise the ink roll and pull outward. (The side notches keep the ink roll in place.
Pushing the back end of the ink roll downward will also release it. We
recommend wearing gloves. Your hands will get ink on them.)
3.
Grab a new ink roll.
4.
Place the new in roll into the label gun as pictured (Sided notched will click in
place when secured).
5.
Close the back flap of the label gun.
Interpretation of Results
Contraindications of Test Results
Documentation
Special Warnings and Cautions
Disposal
Reprocessing Instructions
Point of use:
Preparation for decontamination:
Disassembly Instructions:
Cleaning – Manual:
Use damp cloth to wipe down the Label Gun.
Cleaning – Automated:
Disinfection:
Drying:
Maintenance, inspection, and testing:
