13
EQUIPMENT OPERATION
1.
POSITIONING THE BED
To position the bed, use the castors to move the bed. Once the bed is in its desired
location, lock all castors in place.
2.
USING THE CONTROLLER
The UP arrow ( ) indicates raising the corresponding parts of the bed.
The DOWN arrow ( ) indicates lowering the corresponding parts of the bed.
1.
Use button 1 and 2 to adjust the backrest up or down.
2.
Use button 3 and 4 to adjust the kneebreak up or down.
3.
Use button 5 and 6 to adjust the backrest and kneebreak up
or down simultaneously. (Auto Contour feature)
4.
Use button 7 and 8 to raise or lower the bed platform.
5.
Use button 9 and 10 to tilt the bed into reversed-
trendelengburg and Trendelenburg positions.
The bed is equipped with an Entrapment Safety Measure. If the bed platform is higher
than 320mm from the floor, long press button 8 will lower the bed to 320mm. To
