HealthCare Information BedMate II, Operation Manual, Page: 12 / 43

---------------------------------------------------------------------------------- BedMate II OPERATIONS MANUAL
HealthCare Information, LLC 12
RETAINER PROPERLY INSTALLED
Slide the stem onto the nose of the arm. Make sure the notch on the stem just below the threads fits over
the rotational stop of the arm.
4. Place the retainer over the stem. Make sure the pin in the nose is in the small hole in the
retainer.
5. Thread the retainer nut onto the stem and tighten.
6. Connect the coax cable from the TV to the coax cable from the arm using the supplies coupler.
Slightly wrench tighten both coax connectors to the coupler just enough that you can not undo
the connection by hand.
DO NOT OVER TIGHTEN. 1/16 TO 1/8 TURN PAST FINGER
TIGHT IS ENOUGH. The power cable and Cat5e cables are not used with the BedMate II
and do not need to be connected.
STEM PROBERLY INSTALLED ON
BOTTOM OF NOSE