B-2. Repairing and exchanging the parts
B. Repair and maintenance
16
HEALTH-ONE CO.,LTD.
If mailing the product to the headquarter, we will inspect it and change the defective parts.
Maintenance schedule list
Belt tension and side-drift adjustment
Foreign substance (sweat, dust, oil)
Key check point
Visible inspection
The inside inspection
Measures
Power cord, surface of cable, socket
Intension of running belt and leaning
Horizontality check
Washing the surface with a dry cloth after washing the surface with a wet cloth
Removal of dust using a vacuum after turning off the power switch
Adjusting the tension with a T wrench after visual check
Check horizontal level by inclinometer (or inclinometer app).
D
W
M
O
O
O
O
Foreign substance(sweat, dust, oil)
Key check point
Measures
Belt pulley
Spreading oil
Short circuit of PCB
Removal of dust using a vacuum after turning off the power switch
Checking and adjusting the belt tension, removal of foreign substance(including oil)
or requesting A/S
Please refer to the method to apply oil as below
Removal of dust on the inside PCB by vacuum, check the connection
D
W
M
O
O
O
O
If belt is slipping or leaning to one side, the belt must be adjusted. If you do not adjust the belt tension and position,
it causes damage to related components and running belt.
* Use hexagon wrench to adjust bolt inside the end-cover.
Location of Wrench and Change of Belt & Roller upon turning direction
Belt Section
Wrench movement
Roller shift movement
Side-drifting
Left
(Fig. 1)
Clockwise
Left side backward
To the right
Counterclockwise
Left side forward
To the left
Right
(Fig. 2)
Clockwise
Right side backward
To the left
Counterclockwise
Right side forward
To the right