P/N UMPELSTARONE_REV20181220
11
Hardware/Driver Installation
(for Scale Communication to a
Windows
®
PC)
– (Cont.)
5.
Open Windows
®
“Device Manager” and check that the USB wireless dongle was
recognized by the Windows
®
OS.
6.
Once the driver installation is complete, the USB wireless dongle will automatically
connect to the scale and will be ready to receive data.
7.
The driver installation is now ready to communicate with applications on the PC. Power
on the scale to initialize wireless communication.
Note:
Transmitting data into an EMR system on the PC requires that the user
’s
Windows
®
PC has one of the following systems installed: Allscripts TouchWorks,
Allscripts Professional, Midmark IQ Manager Software, or ChARM Health EHR. See the
Product Overview section on page 3 for more information.
Continue to page 12 for Step 3 - Wireless Communication instructions.
Note:
The set up presumes that the HOMBT1 Scale Unit is attached to the scale, see Step 1 on
page 5.
