2
Introduction
Assembly Instructions
The 2210CART cart is designed for use with
tour 2210KL Neo-natal Scale.
Included in this kit are:
(1) Top shelf with handle
(1) Middle shelf with 8 leg posts
(1) Bottom shelf with caster inserts
(4) Fluted legs (16-1/2”) for cabinet
(4) Square legs (8”) for top shelf
(1) Cabinet back panel
(2) Cabinet side panels
(1) Cabinet door panel
(2) Cabinet door keys
(2) 4” swivel casters with brakes
(2) 4” swivel casters
You will need a rubber mallet.
(Optional: metal hammer with a block of
wood to cushion impact.)
1. Locate the bottom shelf. Place upside
down (ribbed surface up) on a level and
firm floor surface. Insert the stems of the
(2) casters with brakes on the left short
side of the shelf. Insert the other (2)
casters on the right short side. Tap
casters into socket with rubber mallet
until fully seated.
2. Turn cart right side up. Place the four
fluted legs over the corner posts so that
the channels are facing each other. Use
a rubber mallet to tap legs in place.
Make sure that legs are even and fully
seated.
3. Locate back panel and slide into grooves
of two back legs.
Casters with
brakes
Casters with
brakes
