Sight in alignment mark & secure to floor plate
Operating Rail
Mating Surfaces Detail
Placing Portable Advantage Rail on floor plate
CAUTION
RISK OF INJURY!
!
!
IMPORTANT - Ensure
that fastener knobs
are tightly installed
and remain tightly
fastened during use.
Inspect frequently to
ensure knobs are tight
while in use.
Rotate unit until
alignment mark appears
in middle of sight hole
Push down, and turn
each knob clockwise
aproximately four
times until tight
Alignment pin
“snaps” into
center hole of
floor plate
Knobs push
down to engage
in threaded
holes to secure
mast to floor
Place assembled Advantage Rail
Portable on top of the floor plate
such that it is approximately
centered on the floor plate
Inspect threaded holes in
plate to ensure they are
clear of debris
Lift rail 1/4” to unlock,
keep up to rotate
freely, lower at any
time to lock
Move the Advantage Rail Portable
side to side until you hear the
alignment pin “click” into the center
hole of the floor plate, or until the rail
will not move side to side any more
Sight hole helps to
locate knobs
directly over
threaded holes in
floor plate
floor plate
alignment mark
Advantage Rail Portable
(Bottom of mast)
2
3
3
1
1
5
4
2
“CLICK”
Installing & Operating Rail
