background image

Call Free: 1 800 848 1633 or 1 888 HCL INTL

®

(425 4685) Fax Free: 1 800 447 2923

Web Site: www.HealthCareLogistics.com • E

-

mail: [email protected] 

7

High quality, fully concealed hinges are self-closing and can be adjusted in three ways to allow you to align your 

cabinet door for a consistent look.

The right adjustment screw provides side adjustment:

Side adjustment ... regulates the gaps between doors, 

cabinets and walls for perfect parallel alignment. 

The middle adjustment screw provides height 

adjustment:

Height adjustment ... lets you align door levels across a

row of doors so they match precisely at top and bottom.

The left adjustment screw provides depth adjustment:

Depth adjustment ... lets you bring any style of door

into line with the vertical surface of the cabinet.

middle adjustment

screw

Attach the back of the 

cabinet to the wall.

Attach the top and bottom

panels to the back.

Attach the left and right

side panels.

Attach the door and your

cabinet is ready for use.

If you have a hard time attaching a heavier assembled cabinet to the wall, 

try our assemble from the wall method!

ASSEMBLY INSTRUCTIONS FOR THE #5091 & 5092 18”W EASY WALL CABINET WITH LOCKING DOOR

Summary of Contents for 5091








Reviews: