GIPRO X-TYPE GEAR INDICATOR
Supplementary Manual
KTM SMR 450 2004-2007 (GPXT + GPX-WSS)
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
2/3
Mount the wheel speed sensor at the
rear wheel.
(Any rotating metal targets will work, but
the targets must be spaced at equal
distances. Adjust and tighten the sensor so
that the tip of the sensor will be in-line with
the center of the target. The air-gap should
be about 1mm.)
Connect the GPX black wire to the
ignition coil brown wire (ground
terminal).
Also connect the ignition coil ground
terminal to the battery negative terminal.
Connect the GPX red wire to the battery
positive terminal via an on/off switch.
(We recommend using a 12V gel-type
battery with 1.3Ah capacity or smaller.)
