- 2 –
5.
Features
Fast and accurate
Instant and accurate indication of the selected gear (right after the clutch is released) for
added control and safety. The sampling period can be adjusted to make the response
quicker or slower, depending on shift speed and signal conditions.
Touch sensor
All settings can be done via the touch sensor so there’s no opening on the housing, it is
completely sealed and encapsulated in epoxy.
The touch sensitive area is on the TOP of the unit. However, after programming, the unit
can be mounted even with the top side stuck to the dashboard (via the sticky pads
supplied) and will function properly. It can also be used with the optional GIpro Mount.
Quick installation
Plug ‘n Go wiring harness kits are available for most motorcycles. Easy to mount display.
Complete installation can be done within 45 minutes on most motorcycles.
Bright and effective display
Extra bright LED display, housed in a compact box. Available in 5 colors.
Auto Brightness Control
The brightness of the display is adjusted automatically according to the ambient light
intensity. The sensitivity of the sensor can be fine-tuned in the menu.
High Speed Warning and Shift Light function
If you wish, you may set the unit to warn you when the set road speed and/or the set
engine speed is exceeded.
Auto Learning function
The unit learns the gear positions automatically, just start the learning function via the
menu.
Compatibility
Compatible with all HealTech and most aftermarket products, including quick shifters.
Robust design
-
Full SMT-design, encapsulated in epoxy
-
Flash memory to store user settings even with the battery disconnected
-
Only inspected, high quality components are built in
-
Each unit is extensively tested prior to shipping, guaranteed to work
-
100% waterproof (IP68)
6.
Setup (menu)
There are several parameters which can be changed or fine-tuned under the menu.
If there are no gear positions stored in the unit, it automatically starts the Learning
function after power-up as per chapter 6.2
Sign Function
Description
See chapter
Code
Reading the firmware version
6.1
Learning
Learning the gear positions
6.2
Filtering
Adjusting the filtering (sampling period)
6.3
Brightness
Adjusting the sensitivity of the light sensor
6.4
HSW
High Speed Warning function
6.5
ESW
Engine Speed Warning (Shift Light) function
6.6
Upside down
Flipping the display upside down
6.7
Defaults
Resetting all values to factory defaults
6.8
