II
Warnings
Check the device before using to make sure that there is no
visible damage which may affect user's safety or its
performance with regard to sensors and clips. It is
recommended that the device should be inspected minimally
once a week. When there is any obvious damage, stop using
the device.
Special attention should be paid while the oximeter is used
constantly under the ambient temperature over 37
℃
, burning
hurt may occur because of over-heating of the sensor at this
situation.
An uncomfortable or painful feeling may appear if the
oximeter is used continuously on the same place for a long
time, especially for poor microcirculation patients.
It's recommended that the oximeter should not be applied to
the same location for longer than 2 hours. If any abnormal
