BATTERIES & MAINTENANCE
4
Battery Replacement:
Your
HEADHUNTER
metal detector operates with two,
9-volt standard batteries (not supplied). Hourly use can be
extended by using 9V Alkaline batteries.
To add or replace batteries, place a coin in the slot
provided on the bottom of the headphone earcup without
the controls and turn like you would a door key. The
earcup will separate thus exposing the battery
compartment. Note the placement of the worn batteries
before removal. Remove the old batteries and insert two
fresh 9-Volt batteries into the connectors.
After batteries have been installed, carefully align the
earcup halves and press until a solid “snap” is heard. Make
sure battery connector wires are well inside of the seal
area and do not get pinched on reassembly.
Maintenance:
Note: LANDPRO model is not designed for water use. LANDPRO
models do not have a battery check system. They can be operated
continuously up to 50 hours on a fresh set of alkaline batteries. The
operator is advised to keep track of time logged on each set of
batteries to avoid shutdown in the middle of a hunt. Always carry
fresh batteries as a backup on every hunt. This is common practice
with all detectors, with or without a battery check system.
1.
Store your detector in a cool place.
2.
Never store it in a manner that it will be subject to
vibration or shock.
