HEAD HD3000CI Plus, User Manual

Page: 12 / 52

12
1-1. Antenna Setting
This mode is to make setting equipment outside. Press the OK button on the Antenna Setting of the
Search Channel. The Following window will appear. Select one the alternative satellite names,
specify the LNB frequency, set the Tone switch & the DiSEqC switch according to the installed
switch box & DiSEqC. Other parameter values are changed automatically according to satellite name.
ῡ
If you press OK button, satellite list shows up, then you can select your favorite satellite.
Left or right button shows selected satellite list.
ῢ
When the Cusor is on LNB TYPE, if you press OK button, it will show LNB Low, High Frequency.
You can edit Frequency.
ΰ
When the Cursor is on motor setting, if you choose “enable” and press OK button, it will show
DiSEqC 1.2 setting.
ᵉ
22KHz : Select “On” or “Off” for setting
ᵉ 0/12Volt Switch ( ᵀ Optional) :
Select “0 Volt” or “12 Volt” for setting
ᵉ LNB Power : Select “On” or “Off” for setting