Website : Http://www.headele.com Tel NO. +86-755-86111909. FAX NO. +86-755-86111900
5.1 Outdoor section interface
Interface type
Interface application
Remark
SIM
USIM card slot, insert USIM
card as the mentioned
instruction and close the
waterproof plastic cap.
Please do not pull or
insert USIM card
when connecting
with the external
power supplier.
LAN
Ethernet interface for indoor
section WAN/POE port
connection
Please use UTP-five
categories connects
outdoor section. The
categories is better
within 50 meters
long.
5.2 Indicator light
Outdoor section indicator light
Indicator
light Type
Status
Description
SIM
On
SIM card ready
Off
No SIM card
RF
Lighting-off
No 4g signal
Bright one line
Weak 4g signal
Bright two
lines
Medial 4g signal
Bright tthree
lines
Strong 4g signal
SYS
Always on
Searching Network
200ms on,200
ms off
Data transmit
800ms on,800
ms off
Registered network
Lighting-off
Power off/sleep
NET1,NET2
Lighting-on
Connected the LAN port
1s on,1s off
Data transmit
Lighting-off
No connecting of the LAN port
WIFI
Lighting-on
WIFI start-up
1s on,1s off
Data transmit
Lighting-off
WIFI off
6.About internet
Our router supports standard RJ45 cable or wireless WLAN
connection to computer without install any drivers. Windows
XP,Windows 7, Windows 8, MAC OS, Linux, Android available.
When using the internet, please make sure the router is install
successful as mentioned installation instructions.
6.1 About connect with computer
Support connect indoor router and computer via Ethernet cable or
WIFI. When using WIFI, please check the SSID and WIFI password in
the bottom of our router. Each SSID and WIFI password is unique. No
matter what way user takes for connection, please set to the mode: obtain
IP address automatically.
6.2 About landing the router
When obtain the IP address, enter "192.168.1.1" on the browser then
the user’s name and password to login router configuration setting. The
default user’s name is “admin” password is “admin”
Please use the following browser:
● IE 7 or above.
● Firefox 3 or above.
● Safari 4 or above.
● Opera 10 or above.
● Chrome 10 or above.
7. About router configuration
Please make sure that the router is working fluently and is connected
with the computer when configure router. A part of the configure
parameters have to be set under operators advise, if take the error
parameters, the internet would be out of service. Long press “reset”
button restore to factory settings.
Stair menu
Second
menu
Operation instruction
System Status
Running
information
For checking running time, LTE
network
information,
SIM
card
details, WAN, LAN details and WAN
information
Attached
devices
For checking users’MAC address and
IP address.
Traffic
Statistics
For checking the traffic statistics, flow
information is under operator’s
service.
Version
information
For checking the software and
hardware information
Device
Setting
WAN
Setting
Network mode
: wireless network and
PLMN mode optional
Users have the selection in 4G/3G/2G
network. 4G is the fastest, 3G
medium, 2G slowest. If in multiple
selection can set the priority network,
the router could register to the priority
network once the it is the fastest.
Default setting is in multiple selection,
4G preferred.
PLMN is the default setting. User can
activate manual option if necessary.
Manual option needs to search the
available PLMN in advance.
IPV4/IPV6
: setting IP stack of the
router.Default setting is IPV4/IPV6
dual stack.
APN
: Setting dialing access.It is under
operator’s advise. If amending may
not gain the internet service. No
modification
without
professional
guide
PIN
: Setting USIM card’s PIN1 code
and PUK code. If the USIM card
activate
PIN1
code
or
PUK
code,please
insert
the
codes.
Otherwise, the router does not support
dialing.
MTU setting
: setting MTU, It needs
professionals’selection. otherwise it
will lead to network anomaly.
Senior settin
g: Select the router
performance
priority
mode
to
increases router’s running. But it will
increase power consumption and heat.
