UK Top-Cutter 3,0 - 3,5 - 4,0 - 5,0 - 6,0m rigid/hydraulic 01-04-2021
Oil pressure
Minimum 170 bar
Hydraulic outlets
1 double acting
Quick couplings, standard
Sterling type E 402
Hydraulic oil: The machine is filled with
Hydro Texaco HD32
Working with the Top-Cutter Solo
The area must be dry and firm to achieve the best result. Drive around wet spots where the machine
sinks and works unintentionally.
If the shape of the field allows it, it is recommended to try to drive with, for example, a 20° - 35 °
angle on the direction of travel to achieve a better effect.
The speed to be driven should be between 10 - 18 km / h. For solid stones, the speed must be
reduced and possibly lift the machine.
Avoid driving over deep tracks in the field that are perpendicular to the direction of travel, with the
Top-Cutter lowered.
On hydraulic models, the ball valves on the folding cylinders must always be closed when the
machine is in the transport position.
The tractor's lift arms
must always
be in the float position while driving. Do not transfer weight
from the tractor to the Top-Cutter.
The machine support legs
must always
be used when the machine is disconnected. The machine
can stand without support legs but is unstable and can tip over with a slight impact.
Important: When the machine is unfolded, the oil pressure in working position on the
machine's manometer must not exceed 60 - 80 bar.
The 3 parts of the machine must be able to move independently of each other while
driving. If the machine becomes completely stiff, the pressure must be reduced.
