HE-VA Terra-Dan MKII, Operating Instructions Manual

Page: 12 / 48

Terra-Dan MKII 24-04-2018
12
Assembly instructions
Assembling the drawbar and wheel support
Mount the drawbar and its cylinder in the lowest holes of the three-
point linkage.
Mount the wheel support at the rear of the main frame, using the
Ø50mm pin. Next, mount the wheel cylinder between the frame and
the support.
Connect hydraulic hoses and fasten them to the parking device on
the drawbar.
Mounting the square tube roller / V-profile roller
Mount the roller arms (pos. 6 og 7) onto the harrow.
Pos. 6 should be mounted towards the centre of the harrow.
Mount the roller bar and the roller, as shown below.