HE-VA Disc-Roller Contour, Operating Instructions Manual

Page: 7 / 72

Disc-Roller Contour 4,5 – 5,5 – 6,5 m 20-09-2020
7
Back to the table of contents
Labels on the machine
You will find several labels on your Disc-Roller containing safety and practical instructions as regards the
correct application of the machine. Please study the instructions and point out to the user the importance of the
labels as well as the
safety instructions in these Operating Instructions. Always keep the labels clean and
readable – if not they must be replaced.
Safety – and other markings on the machine
Study the Operating Instructions thoroughly before any
operation of the machine and observe all safety
instructions.
Take care that no persons are within the machine’s
hazardous area during the unfolding and folding
procedure..
Plate with number and year of manufacture
Tighten up the bolts regularly. If this is not performed, our
warranty obligations will no longer apply.
Maximum torque in Nm. w/lubricated thread
Metric thread Quality 8.8 Quality 10.9 Quality 12.9
M10x1,5 47 65 79
M12x1,75 81 114 136
M14x2,0 128 181 217
M16x2,0 197 277 333
M18x2,5 275 386 463
M20x2,5 385 541 649
M22x2,5 518 728 874
M24x3,0 665 935 1120
Wheel-fixing bolt M18x1,5 fine-pitch thread 433 Nm
Wheel-fixing bolt M22x1,5 fine-pitch thread 803 Nm