Combi-Tiller
03/09 -2015
9
Start-up of the machine
General information
A hydraulic folding machine requires 1 double acting outlet (hydraulic).
Attachment and uncoupling (rigid machines)
1.
Under normal circumstances attach the tractor in the lowest lifting points of the machine both as
regards the lifting arms and the top link.
Change-over between working and transport position (only machines with hydraulic folding)
From transport into working position:
1.
Open the ball valves.
2.
The machine is lifted to max. transport height.
3.
Unfold the wing sections.
4.
Adjust the working depth.
From working into transport position:
1.
The machine is lifted to max. transport height.
2.
The wing sections can be folded in.
3.
Close the ball valves and relieve the hydraulics.
Important
If the Combi-Tiller is mounted in an already section divided construction, there is a risk of an overload of
the original construction. Therefore it is important to keep an eye on eventual sign of overload and the
like.
In case of indication that the machine is damaged, it is to be reinforced at once.
HE-VA ApS disclaims every responsibility if the machine is of another make, or if the Combi-Tiller is
mounted in a combination without any preceding qualified guidance.
