3
OPErATION CONTrOLS & FuNCTIONS
TrANSmITTEr FrONT & rEAr PANELS
q
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only (1) side of device requires power
supply when both Transmitter and Receiver obtain PoC function.
w
LINk LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the Receiver side. When the data
transmission occurs with errors, the LED will blink.
e
Power LED:
This LED will illuminate when the devices are connected with power supply.
r
CAT5e/6 OuT:
Connect to the Receiver unit with a single CAT5e/6/7 cable for transmission of all data signals.
t
RS-232 IN:
Plug the 3.5Ø to D-Sub 9-pin female cable included in the package and connect to a PC or laptop for RS-232 commands
transmission.
y
IR2 EXTENDER:
Connect to the supplied IR Extender cable for IR signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
u
IR1 BLASTER:
Plug the IR Blaster included in the package for IR signal sending from the Receiver side.
i
HDMI IN:
Connect with source equipment such as DVD/Blu-ray player.
rECEIvEr FrONT & rEAr PANELS
q
DC 24V:
Plug the 24V DC power supply into the unit and connect the adaptor to an AC outlet. Only 1 side of device require power
supply when both Transmitter and Receiver obtain PoC function.
w
LINk LED:
This LED will illuminate when the devices are connected with a CAT5e/6/7 cable from the transmitter side. When the data
Transmission accrue with error the LED will be blinking.
e
Power LED:
This LED will illuminate when the device is connected from the transmitter with power supply.
r
CAT5e/6 IN:
Connect to the Transmitter unit with a single CAT5e/6/7 cable for transmission of all data signals.
t
RS-232 OuT:
Plug the 3.5Ø to D-Sub 9-pin male cable included in the package and connect to the device that is to be controlled by
RS-232 commands.
y
IR1 EXTENDER:
Connect to the supplied IR Extender cable for IR signal reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
u
IR2 BLASTER:
Plug the IR Blaster included in the package for IR signal sending from the Receiver side.
i
HDMI OuT:
Connect to a HDMI equipped TV/monitor for display of the HDMI input source signal.
q w
e
r
t
y
u
i
q w
e
r
t
y
u
i
