8
4
th
Remote control settings
After connect the video wall controller to the TV, the red power indicator
light is on, and the device can work normally. The device can be easily set or
configured through the remote control or key button.
1.
set up the remote control:
1
.
menu
Press the remote control
MENU
Key, Will come out with a main menu
2 , Select the submenu
Press the
MENU
button continuously to make the cursor stay in different
submenus. The submenu that is staying is red text. Press
OK
to select to enter the
submenu. After the selected menu changes to green text, the corresponding
submenu can be set.
3
.
Change the product settings
After menu turns to green, can use the remote control
Or
keys to
change product parameters or properties, press the return key
to save the
setting and exit the menu.
2. signal source selection
Source menu options have: Auto-select, D0: DP
,
D1:HDMI
,
D2:MHL .
2.1 , Automatic selection:
The sub-menu "Source" is set to "Automatic Selection" by the remote
control. When the device is not connected to other sources, the inserted signal
source can be automatically recognized and automatically displayed on the
splicing unit.
2.2,Manual selection:
